Open the Start Part and add the Surfaces Toolbar
Download and open Flashlight Start
Sketches.SLDPRT
Open the Surfaces Toolbar or add
Surfaces to the Command Manager
Create a revolved Surface
Select the Revolve Surf Sketch
Select the Centerline of the sketch as
the parameter
Set it to 360 Deg
Create an Extruded Surface
Select the Extrude Surf sketch
Give it a blind depth of 30
Add a Surface Plane to the top of the surface extrusion
Select the top edge of the extruded
surface as the references
Notice the three Surface Bodies on the History Tree
Add a Trim Surface
Select Mutual
Select Both Surfaces
Under Keep Selections - Select
the portions you want to keep
Notice that there are two Surface Bodies now
Knit the two remaining surfaces to form one surface Body
Select the two remaining Surface
Bodies
Add a Solid Fillet
Select the indicated edges
Radius = 1
Create a Thin Solid of the Surface Body
Select Insert>Boss Base>Thicken
Select the Surface Body
Under Thicken Parameters select the
last Surface Body
Thickness = 0.2
Material on the outside
Save the Part